Electric breast pump Easy Start

Electric breast milk pump EasyStart effectively supports and regulates lactation in case of breast milk retention and breast overflow.

It is perfect both at the beginning of breastfeeding and after expressing, as well as for mothers who express breast milk periodically.

The EasyStart breast pump is recommended by 91% of midwives.*

There are 3 operating modes based on the baby's natural biphasic sucking rhythm. In the first phase, it stimulates the flow of breast milk, and then switches to a mode of slower and deeper pumping.

The third mode can be used at the end of pumping to help empty the breasts and stimulate lactation.

In each operating mode, it is possible to choose one of three levels of suction power according to your individual needs.

The EasyStart electric breast pump is quiet - approx. 51-56 decibels**, which allows expressing milk at night without worrying about waking the baby.

The EasyStart breast pump is both mains and battery powered, so you can take it anywhere and use it wirelessly.

The funnel with a soft, profiled massaging pad made of delicate silicone - does not irritate the sensitive nipples and increases the comfort when squeezing.

The breast pump has a small number of parts, making it easy to clean and assemble.

All parts are free of the harmful BPA (bisphenol A), which makes it completely safe for health and suitable for direct contact with food, including breast milk.

The EasyStart breast pump is compatible with all bottles from the Canpol babies range, thanks to which you can adjust the capacity of the bottle according to the age and needs of your child.

The kit includes a spare 27mm funnel. The correct size of the funnel is very important for the comfort and efficiency of the extraction. Breast pump funnel with elastic edge - also ideal for mothers with larger nipples.

*According to the results of a survey conducted among a group of 301 midwives in 2018.

***Example noise level: 40-45 dB refrigerator, 58 dB microwave oven, 60 dB dishwasher.

Instructions for use:

Remove the silicone hose and connector from the breast pump. These parts do not require cleaning, as the membrane protects them from contact with breast milk. Before first use, disassemble the following parts of the breast pump: diaphragm upper body, diaphragm, funnel body, silicone massage pad, silicone valve, bottle and bottle adapter.

Wash them in hot water with a mild detergent, rinse thoroughly. Sterilize in water for approx. 5 minutes. Dry thoroughly before assembly and subsequent use. ATTENTION! Do not wash the silicone hose, the connector and especially the electrical components. Wipe them with a damp cloth.

Make sure the breast pump is cleaned and sterilized before use. Wash your hands thoroughly. Connect the breast pump to the power supply. Press the on/off button. A light will illuminate above the button to indicate that the breast pump is on. Place the breast pump on your breast so that the silicone massage pad fits snugly, thus preventing air flow. If a leak occurs, the performance of the pump can be significantly reduced. Always hold the bottle upright so that breast milk can flow freely to the bottom of the bottle. The breast pump allows you to adjust the rhythm and strength of the vacuum according to individual needs. Press the "mode" button to adjust the vacuum power, select one of three modes: express, natural, strong. Also set your preferred power. Express breast milk from one breast until you feel it flow much more slowly. Attach the pump to the other breast, continue pumping. When you are done expressing, unscrew the bottle from the breast pump.